Industrial Machinery Marketplace http://www.secondmachinery.com Buy and Sell industrial machinery and equipment for printing, packaging, textile, construction, metalworking and woodworking industries. en Sun, 05 Sep 2010 09:40:26 GMT vBulletin 60 http://www.secondmachinery.com/rss.jpg Industrial Machinery Marketplace http://www.secondmachinery.com POLLY http://www.secondmachinery.com/4-colour-printing-press/1434-polly.html Sat, 04 Sep 2010 13:55:05 GMT Straight, no perfector
Polycontrol ink and register
Half-automatic plate change
Blanket cylinder washer
Roller washer
СIP3
Double size transfer cylinder
Double size Impression cylinder
IR dryer
High Pile delivery ]]> 4 Colour Printing Press fcm http://www.secondmachinery.com/4-colour-printing-press/1434-polly.html POLAR http://www.secondmachinery.com/guillotine/1433-polar.html Sat, 04 Sep 2010 13:38:25 GMT Air table Side table left with air Side table right with air 3 Widea knifes Back table cover Air table
Side table left with air
Side table right with air
3 Widea knifes
Back table cover
Attached Thumbnails
 
]]> Guillotine fcm http://www.secondmachinery.com/guillotine/1433-polar.html KOLBUS http://www.secondmachinery.com/perfect-binder/1432-kolbus.html Sat, 04 Sep 2010 13:33:45 GMT Gatherer KM 473 with 18 stations Ratiobinder KM 473 with 27 clamps Cover feeder Type NA 401.A PUR EVA Hotmelt back gluing with 2 application... Gatherer KM 473 with 18 stations
Ratiobinder KM 473 with 27 clamps
Cover feeder Type NA 401.A
PUR
EVA Hotmelt back gluing with 2 application rollers
Hand feeding station
Exchangable PUR Hotmelt Back gluing
EVA Hotmelt side gluing
Gauzing
Cooling tower Type XAF 660
Trimmer HD 152.P
Stacker CB 16
ATC
IR heating cooling section
60m
Routing station with dust extraction
Premelter LH 370
Hotmelt
Robatech Type XRT 952
Premelter,
Nordsson TYP XNO 923 premelter, and lining station
Creasing station ( 4x creasing )
2 x Pressing station
Lay-down device
Swiss brochure device ]]> Perfect Binder fcm http://www.secondmachinery.com/perfect-binder/1432-kolbus.html MάLLER MARTINI http://www.secondmachinery.com/saddle-binder/1431-muller-martini.html Sat, 04 Sep 2010 13:29:45 GMT 6 x 345 feeder 4 x 2 Bases Cover Feeder 1528 Stitching Unit 335 2 Stitching heads HK 75 Three Knive Trimmer 251 Center Cut Stacker CS 14 2 x... 6 x 345 feeder
4 x 2 Bases
Cover Feeder 1528
Stitching Unit 335
2 Stitching heads HK 75
Three Knive Trimmer 251
Center Cut
Stacker CS 14
2 x Pumps
21.500 h ]]> Saddle Binder fcm http://www.secondmachinery.com/saddle-binder/1431-muller-martini.html STAHL http://www.secondmachinery.com/paper-folder/1430-stahl.html Sat, 04 Sep 2010 13:24:23 GMT Pallet feeder Tremat in feeder 4 x pockets 2 x electronic knifes 1 x pocket left side Press delivery SKP-66-D+MKE Air supply ROLLERS NEW... Pallet feeder
Tremat in feeder
4 x pockets
2 x electronic knifes
1 x pocket left side
Press delivery SKP-66-D+MKE
Air supply
ROLLERS NEW GUMMED IN 2010 ]]> Paper Folder fcm http://www.secondmachinery.com/paper-folder/1430-stahl.html STAHL http://www.secondmachinery.com/saddle-binder/1429-stahl.html Sat, 04 Sep 2010 13:17:41 GMT 6x TAS upright drum feeder 1x UFA cover feeder Stitching Unit 2 standard and 4 eyelet stitching heads 1x Trimmer with center cut Compressor 6x TAS upright drum feeder
1x UFA cover feeder
Stitching Unit
2 standard and 4 eyelet stitching heads
1x Trimmer with center cut
Compressor
Attached Thumbnails
   

]]> Saddle Binder fcm http://www.secondmachinery.com/saddle-binder/1429-stahl.html STAHL http://www.secondmachinery.com/paper-folder/1428-stahl.html Sat, 04 Sep 2010 13:16:51 GMT Flat pile feeder 4 pockes Delivery subject to prior sale Flat pile feeder
4 pockes
Delivery



subject to prior sale ]]> Paper Folder fcm http://www.secondmachinery.com/paper-folder/1428-stahl.html Krause http://www.secondmachinery.com/die-cutter/1427-krause.html Fri, 03 Sep 2010 07:14:12 GMT 64x90cm, machanical clutch, precise and good, made early 80-s 64x90cm, machanical clutch, precise and good, made early 80-s
Attached Thumbnails
 
]]> Die Cutter topgraphic http://www.secondmachinery.com/die-cutter/1427-krause.html Used printing machinery in good condition http://www.secondmachinery.com/4-colour-printing-press/1426-used-printing-machinery-good-condition.html Thu, 02 Sep 2010 08:37:41 GMT Dear Sirs Our company Keijo Malinen Oy has over 30 years of experience in buying/selling second-hand printing machinery. All our machines are in... Dear Sirs

Our company Keijo Malinen Oy has over 30 years of experience in buying/selling second-hand printing machinery.
All our machines are in good condition and checked prior offering to our clients, so you can be sure to get good quality, good condition machines.

Please take a look at our September stocklist:

4 and more colour

Roland 708 3B P 4/4 HiPrint, year 2009, imp. 14 mio, Like new!

Adast Dominant 856, year 2000, imp. 39, semiautomatic plate clamps, Technotrans, Adamatic alcohol dampening

Heidelberg SM 72 VP, year 1981, imp. 96 mio, conventional dampening, CPC 1.01

Ryobi 524 HX, nr. 1093, year 1998, imp. 30 mio, Ryobimatics, CPS

2 colour

Heidelberg MOZ-E, nr. 604275, year 1984, conventional dampening, 67 mio.

Planeta Supervariant P24-6SW, year 1985, imp. 31 mio, 4000 hours, format 710 x 1020, perfector, conventional dampening

GTOZ 52 + NP, nr. 700836, year 1990, imp. 34 mio, bare back, conventional dampening

Guillotines, folding and binding machines

Herzog & Heymann S19, year 1987-88, format 52 x 76, 4+2, glue

GUK folding machine: Typ. FA 36/6-6K FN-TH, nr. 39073, year 1998. Typ. FA 36/6 ST2, nr. 39074, year 1998, variable, window folding pocket

Wohlenberg MCS-3 137 guillotine, nr. 3109-005, air table, 2 spare knives

Wohlenberg 76, guillotine, year 1989 or 1990

Horizon BQ 440, nr. 129001, 4 clamps, autom. suction cover feeder + scoring unit, milling station, hot melt, spine and side glueing, max. size 320 x 320 mm (cover: 650 x 320), min. size 75 x 75 mm, max. thickness of books: 40 mm, speed max 1.100 books/hour

Horizon Booklet Marker stitcher & folder SPF-20 AF II nr. 004003, trimmer FC-20 AF II, control unit CFS-20 AF II

Harris 562 saddle stitcher, nr. 565, 4 stations, stitching, three-edge cutter, delivery table

Hohner Favorit stitching machine, nr. 2103

Miscellaneous

Heidelberg Cylinder SBD rollers, 8 new and 7 used

Bacher 2045 plate bunch, nr. 7811

Horsell Mercury 650 Litho Plate Processor, nr. JC0529, year 1997

Glunz & Jensen, Ozasol VA 66 E-P plate processor, year 1997

Stahl SBE 46 stacker, nr. 26107

Polar L600 W3 pallet lifter, nr. 6072345, year 1990
Polar L600 W3 pallet lifter, year 1996

For more information don't hesitate to contact us.
See also www.kmoy.fi!


Best regards
Keijo Malinen Oy
Saukontie 11
57210 Savonlinna
Finland
Tel +358 50 5900728
Fax +358 15 520923
skype: kmoy_info
info@kmoy.fi
www.kmoy.fi
www.kesaranta.net Cottage rental ]]> 4 Colour Printing Press kmoy http://www.secondmachinery.com/4-colour-printing-press/1426-used-printing-machinery-good-condition.html MAZAK integrex http://www.secondmachinery.com/cnc-turning-centre/1425-mazak-integrex.html Wed, 01 Sep 2010 19:55:50 GMT Specification........... Max. turning length : MAXIMUM CUTTING LENGTH 60 mm Max. turning diametre : MAX MACHINING DIA 33.5 mm Spindle nose :... Specification...........

Max. turning length : MAXIMUM CUTTING LENGTH 60 mm
Max. turning diametre : MAX MACHINING DIA 33.5 mm
Spindle nose : SPINDLE NOSE A2-8
Spindle bore : SPINDLE BORE 3.46 mm
Turning speed : SPINDLE SPEEDS 4000 RPM rpm


MAX. SWING 33.5"
MAX. SWING USING Y-AXIS 26"-33.5"
MAX MACHINING DIA 33.5"
MAX. SWING OVER LOWER TURRET 16.5"
MAXIMUM CUTTING LENGTH 60"
SPINDLE BORE 3.46"
SPINDLE NOSE A2-8 MAX BAR CAPACITY 3.0"
SPINDLE SPEEDS 4000 RPM AXIS TRAVEL C - AXIS .0001 INCREMENTS X - AXIS 24.8" Z - AXIS 62.41" X2- AXIS (LOWER TURRET) 9.06" Z2- AXIS (LOWER TURRET) 60.2" Y - AXIS +/- 4.53" B - AXIS 225° 5 DEGREE CLAMPING W - AXIS
(SECOND SPINDLE) 60.24"
SECOND SPINDLE RPM 4000 RPM
SPINDLE NOSE A2-8 SPINDLE BORE
(SECOND SPINDLE) 3.46" BAR CAPACITY 3" SECOND SPINDLE MIN.
INDEXING .0001° SECOND SPINDLE TRAVEL 60.2" RAPID TRAVERSE RATES C - AXIS 555 RPM X - AXIS 1496 IPM Z - AXIS 1496 IPM Y - AXIS 1023 IPM B - AXIS 555 RPM W - AXIS 1181 IPM MIN.
SPINDLE INDEXING (MAIN SPINDLE)
DEGREE TOOL MAGAZINE CAPACITY 40 ATC CAPTO LOWER TURRET POSITIONS 9 TOOL DRUM MAX.
TOOL DIA. ADJ. 3.54"/4.92" MAX.
TOOL LENGTH 15.75" ROTARY TOOLS SPINDLE NOSE CAPTO STYLE ROTARY TOOL SPINDLE SPEED 12,000 RPM ROTARY TOOL MOTOR 25 HP MAXIMUM TOOL WEIGHT 22 LBS. Z - AXIS THRUST 3124 FT/LBS. MAIN MOTOR / SECOND SPINDLE 35 HP/AC 35 HP

Equipped with: MAZATROL PC FUSION 640MT PRO CNC CONVERSATIONAL CONTROL SIMILTANEOUS 6-AXIS PACKAGE 10"
3-JAW HYDRAULIC CHUCKS FRONT/REAR 12.1"
COLOR SCREEN AUTOMATIC OPEN/CLOSE AUTOMATIC OPEN/CLOSE CONFIRMATION THREAD POINT COMPENSATION CYLINDRICAL INTERPOLATION POLAR CO-ORDINATE INTERPOLATION TOOL WEAR COMPENSATION TOOL EYE MEASUREMENT FOR UPPER AND LOWER TURRET MAZAK TORNADO TAPPING 48 ALPHANUMERIC CHARACTERS FOR PROGRAM NAME (MAZATROL) MAZATROL AND EIA/ISO PROGRAMMING TOOL LIFE MONITORING BACKGROUND TOOL PATH CHECK MILLING SPINDLE MULTI-ORIENT 8 FIGURE PROGRAM NUMBER (EIA) BARRIER PROTECTION MACHINING NAVI-MONITOR NETWORK LAN AND MOTEM PREPPED FOR FLASH AND MULTI C-AXIS MAIN SPINDLE DRIVE PACKAGE TOOL EYE AUTOMATIC FRONT AND SECOND SPINDLE. ]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1425-mazak-integrex.html MAZAK integrex http://www.secondmachinery.com/cnc-turning-centre/1424-mazak-integrex.html Wed, 01 Sep 2010 19:51:49 GMT Specifications -----

Spindle motor-40 HP kW
Spindle nose-A2-
Spindle bore-11 mm
Chuck Size 15" Hydraulic
Machine Dimensions 275"x120"x115"
Machine Electrics 200-220V/60/3
Machine Weight 33,510 lbs.
Magazine Capacity 120 Position ATC
Maximum Cut Diameter / Length 27.95" / 81"
Maximum Swing / Over Carriage 28" / 20.5"
Rotary Tool HP 15 HP
Rotary Tool Speed 18 - 3000 RPM
Rotary Tool Spindle Nose BT # 50
Spindle Indexing .001 Degree
Spindle Motor HP 40 HP
Spindle Nose/Bore/Max. Bar Work A2-11"/4.10"/3.5"
Spindle Speed 2 - 2,300 RPM
Tailstock Quill Stroke / Taper 5.1" / MT #5
X Axis Travel 25.39"
Y Axis Travel +/- 4.13"
Z Axis Travel 83.46"

Equipped With
15" Hydraulic 3 Jaw Chk. Chip Conveyor Tailstock SMW Hydraulic Steady Rest Full "C" Axis Capability All Available Rotary Tooling
Automatic Tool Eye Automatic Chuck Jaw Changer Adjust. Chk. Jaw Clamp Press...... Y Axis Capability 120 Station Tool Changer 50 Taper Rotary Tools
Attached Thumbnails
 
]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1424-mazak-integrex.html MAZAK http://www.secondmachinery.com/cnc-turning-centre/1423-mazak.html Wed, 01 Sep 2010 19:42:07 GMT huck Size 8"
Max Diameter Bar Capacity 2"
Max Swing Over Bed 23.6"
Max Turning Diameter 15.7"
Max Machining Length 19.7"
Tools 12
Spindle Motor 20 / 15 HP AC
Spindle Speed 50 - 5000 RPM
Spindle Bore 2.4"
Spindle Nose A2-6
Spindle Torque 183 ft. lbs.
Rapid Traverse Rates (X / Z) 1200 / 1300 IPM
X-Axis Travel 8.46"
Z-Axis Travel 20.1"
Turret Index (Single Step) 0.21 Seconds
Tailstock Taper MT #4
Machine Dimensions (L x W x H) 107" x 64" x 67"
Machine Weight 9900 lbs.

FEATURES:
MAZATROL FUSION 640T CNC CONTROL
10.4" Color LCD
Conversational Programming
Graphic Display
1 MB Memory
3.5" Floppy Disc Drive
1.5 GB Hard Drive
8" Hydraulic Chuck
Auto Parts Catcher
Programmable Tool Eye
Programmable Tailstock Body & Quill
Barfeed Interface
Servo Driven Turret
Chip Conveyor
Attached Images
 
]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1423-mazak.html DOOSAN http://www.secondmachinery.com/cnc-turning-centre/1422-doosan.html Wed, 01 Sep 2010 19:39:13 GMT CAPACITY:
-SWING OVER BED: 21.7"
-SWING OVER CARRIAGE: 15.4"
-MAXIMUM TURNING DIAMETER: 11.4"
-MAXIMUM TURNING LENGTH (240MB / 240MC): 20.1” / 19.7”

SPINDLE: 240MB
-SPINDLE SPEED – RPM: 45 - 4,500
-SPINDLE NOSE: A2-6
-DRAW TUBE I.D: 2.68”
-STANDARD CHUCK THOUGH HOLE I.D.: 2.59”
-SPINDLE BORE DIAMETER: 2.99"
-AC SPINDLE MOTOR (30 MIN. RATING): 25 HP
-MAXIMUM SPINDLE TORQUE (30 MIN. RATING): 227 FT-LBS
-STANDARD CHUCK SIZE: 8.25”
-TURRET IS NOT INTERFERENCE FREE FOR A 10” CHUCK

C-AXIS:
-MINIMUM PROGRAMMABLE ANGLE (DEGREES): .001
-RAPID TRAVERSE RATE (RPM): 200
-C-AXIS REPEATABILITY: +/- .006 DEG.
-C-AXIS POSITIONING ACCURACY: .0167 DEG.

BED, SADDLE & CROSS SLIDE:
-X-AXIS TRAVEL: 8.0"
-Z -AXIS TRAVEL: 22.8"
-ANGLE OF SLANT BED: 45 DEGREES
-X -AXIS GUIDEWAY SPAN: 10.0”
-Z -AXIS GUIDEWAY SPAN: 14.2"
-TAILSTOCK GUIDEWAY SPAN: 8.6”
-X -AXIS RAPID TRAVERSE RATE: 945 IPM
-Z-AXIS RAPID TRAVERSE RATE: 1,181 IPM
-X-AXIS BALL SCREW DIAMETER: 1.1"
-Z-AXIS BALL SCREW DIAMETER: 1.3"
-X-AXIS FEED THRUST (CONTINUOUS/INTERMITTENT): 1,128 / 1,805 LBS
-Z-AXIS FEED THRUST (CONTINUOUS/INTERMITTENT): 1,354 / 2,167 LBS
-X-AXIS REPEATABILITY: + 0.00006"
-Z-AXIS REPEATABILITY: + 0.00008"

TURRET:
-NUMBER OF TOOLS : 12
-TOOL HOLDER TYPE: BMT 55
-TURNING TOOL SHANK SIZE: 1.0"
-BORING BAR DIAMETER: 1.5"
-TURRET INDEX TIME (NEXT STATION SWIVEL TIME): 0.1 SEC.
-TOOL SELECTION: BI-DIRECTIONAL
-CURVIC COUPLING DIAMETER: 7.9"
-TURRET CLAMPING FORCE: 10,115 LBS
-TURRET INDEX REPEATABILITY: + .0005 DEGREE

ROTATING TOOLS:
-ROTATING TOOL RPM : 50 - 5,000 RPM
-ROTATING TOOL SPINDLE MOTOR (10. MIN RATING): 7.5 HP
-ROTATING TOOL TORQUE (10. MIN RATING): 34.7 FT-LBS.
-ROTATING TOOL COLLET TYPE: ER 25
-MILLING COLLET CAPACITY: 1/8" TO 5/8"

TAILSTOCK:
-TAILSTOCK QUILL DIAMETER: 3.0"
-TAILSTOCK QUILL STROKE (PROGRAMMABLE): 3.15"
-MAXIMUM TAILSTOCK QUILL THRUST / MAXIMUM HYDRAULIC PRESSURE: 1,090 LBS. / 580 PSI
-TAILSTOCK TAPER: MT #4
TOOL SETTER
PARTS CATCHER
PARTS CONVEYOR
CHIP CONVEYOR
3 OR 4 ROTARY TOOLS (WILL CONFIRM)
MTA BARFEED
Attached Thumbnails
 
]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1422-doosan.html MAZAK http://www.secondmachinery.com/cnc-turning-centre/1421-mazak.html Wed, 01 Sep 2010 19:35:19 GMT SPECIFICATIONS:
MAXIMUM SWING24"
MAX. CUTTING DIAMETER13.78"
MAX. CUTTING LENGTH18"
X AXIS TRAVEL7.5"
Z AXIS TRAVEL20.25"
RAPID TRAVERSE X AXIS1181 IPM
RAPID TRAVERSE Z AXIS1299 IPM
SPINDLE NOSEA2-8
SPINDLE SPEEDS40 - 4,000 RPM
SPINDLE BORE3.46"
BAR CAPACITY3.0"
SPINDLE MOTOR35 HP
TURRET CAPACITY12 STATIONS
TAILSTOCK TAPERMT #5
TAILSTOCK TRAVEL20.6"
APPROX. DIMENSION104 x 70" x 72"
APPROX. WEIGHT11,000 LBS

EQUIPPED WITH:

MAZAK MATRIX CNC CONTROL W/12" LCD SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
10" 3-JAW HYDRAULIC CHUCK, TOOL PRESETTER
S-30 COLLET CHUCK, LIFT-UP CHIP CONVEYOR
AUTO PARTS CATCHER, BARFEED INTERFACE
STANDARD COOLANT SYSTEM WITH TANK & PUMP
FULLY ENCLOSED SPLASH & SAFETY GUARDING
ALL AVAILABLE TURRET TOOLING & MANUALS
CLEAN, CHECKED AND AVALIABLE. ]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1421-mazak.html DAEWOO PUMA http://www.secondmachinery.com/cnc-turning-centre/1420-daewoo-puma.html Wed, 01 Sep 2010 19:24:24 GMT Chuck Size 12"
Max Swing Over Bed 15.7"
Max Turning Diameter 12.6"
Max Machining Length 7.9"
Max Workpiece Weight with Chuck 220 lbs.
Main Motor 30 / 20 HP
Tools 12
Spindle Speed 50 - 3300 RPM
Spindle Nose A2-8
Spindle Torque 516 ft. lbs.
Rapid Traverse Rates (X/Z) 1800 / 1200 IPM
X-Axis Travel 49.2"
Z-Axis Travel 14.17"
Part Load Time 8 Seconds
Turret Index (Single Step) 0.1 Seconds
Machine Dimensions (L x W x H) 114.9" x 79.7" x 116.5"
Machine Weight 19,845 lbs.

FEATURES:
FANUC 18iTB CNC CONTROL
Inverted Spindle Design
Part Load / Unload Conveyor
12" Hydraulic Chuck
Chip Conveyor
Three Color Tower Light
Attached Images
 
]]> CNC Turning Centre 461 http://www.secondmachinery.com/cnc-turning-centre/1420-daewoo-puma.html